离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

国防知识产权运营市场化研究

提高国防知识产权转化应用水平,关键是解决制约国防知识产权转化应用的体制机制问题。可借鉴普通知识产权运营经验,以市场化方式促进国防知识产权运营工作。针对当前运营中出现的市场失灵现象,从创新政府治理模式、引入市场机制、增强法律法规建设、搭建公共服务平台等途径入手,逐步理顺政府与市场的关系,进行国防知识产权运营市场化改革。     

基于灰色模型的电磁轨道发射装置温度研究

在电磁发射过程中导轨温度受众多因素影响,而其中部分因素很难进行精确分析,为此运用灰色系统的分析方法对电磁轨道发射装置温度进行研究。为获取模型所需实验数据,搭建电磁轨道发射装置测试系统,并借此测量发射过程中的电流、导轨温度、出口速度等数据。由于测量仪器限制,借助ANSYS有限元仿真对测得的导轨温度数据进行修正,以获得导轨内表面温度。基于经典GM(1,N)模型与Simpson公式,提出一种改进型灰色模型,并以此方法对导轨温度展开研究,进一步选取同能级试验,对不同位置处各因素温升贡献度进行讨论。结论为进一步深入研究导轨温度提供参考和依据。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

混合隔振系统中电磁作动器的优化设计

由于混合隔振系统中的电磁作动器对电磁力、体积重量、损耗等指标有着严格的限制,因此电磁作动器的优化设计显得十分重要。为此,提出了电磁作动器系统参数(包括几何尺寸参数和电参数)的优化设计方法,推导了电磁作动器总损耗与系统参数间的关系。通过有限元分析软件ANSYS中的优化设计模块,使用ANSYS参数化设计语言建立了在保证电磁力及体积限制条件下,以总损耗最小为目标函数的三维参数化分析模型,多次循环迭代求解后得到了较为优化的系统参数。仿真及实验结果表明:按照该方法设计的电磁作动器能够满足各项设计指标要求,且性能比其他参数下更为优化。     

复杂电磁环境下搜索雷达探测概率仿真分析

为了具体分析复杂电磁环境对舰载搜索雷达的影响,针对搜索雷达干扰方式的数学模型,从研究搜索雷达探测概率的角度建立了作战效能模型.以这些数学模型为基础和依据,对海军作战仿真系统中,复杂电磁环境下舰载警戒搜索雷达探测概率进行了多次定量仿真计算,给出了主要数据结果.仿真计算结果与理论值基本吻合,证明仿真计算的结果是可靠的,能够反映复杂电磁环境对搜索雷达探测概率的实际影响.     

复杂电磁环境舰艇电子对抗仿真系统研究

针对目前舰艇电子对抗装备作战效能分析、作战使用方法研究和训练平台实用性不强的现状，采用复杂电磁环境生成技术，运用电子对抗作战使用理论，结合系列研练电子对抗反导积累相关数据，建立电子对抗仿真模型，实现仿真系统控制、复杂电磁环境接收与生成、三维海战场环境仿真显示、多型电子对抗显控界面仿真、舰艇电子对抗作战效能评估、舰艇电子对抗仿真训练成绩评定等功能，研制贴近实际的复杂电磁环境水面舰艇电子对抗装备作战运用仿真系统，以充分发挥舰艇电子对抗装备的作战潜能。     

电磁脉冲武器对抗来袭目标可行性研究

针对电磁脉冲武器独特的毁伤机理,计算了杀伤覆盖区域和辐射到目标处的功率密度等作战能力指标,并以反舰导弹为例分析了强电磁脉冲的耦合途径,通过评估前后门耦合的电磁能量,在理论上论证了用电磁脉冲武器对抗来袭目标的可行性.     

型号研制与产品数据管理

介绍了产品数据管理(PDM)的概念和基本功能,结合当前型号研制的特点和计算机信息技术应用的状况、发展,研究了型号研制产品数据管理的需求、功能及实施,为当前型号研制依靠CIMS技术实现产品数据管理提出了8条基本原则。